Linksys PAP2
As of earlier 2006 BCWARN has moved to the Linksys PAP2 Voice-Over-IP ATA. These ATA's produce great audio quality and allow for the use of the G729A licensed audio codec.
The PAP2 line has two telephone jacks which allow the end user to have two separete telephones connected on two separete phones lines or phone numbers. These are commonly used in a telephone / facsimile situation. Currently facsimile operation has not been tested on the BCWARN VOIP system. An example of the two line usage is in a repeater site configuration where you have the first line for the site phone and the second line available for a autopatch.
BCWARN currently has a number of these in operation in both a permanent installation and in grab'n'go kits.
Model Types
PAP2 First Generation PAP2 ATA. These units were usually resold under a particular VOIP providers name (i.e Vonage,etc). Discontinued
PAP2-NA First Generation open ATA. This ATA was sold without any association to a particular VOIP provider (i.e. Vonage, Link2Voip,etc). Discontinued
PAP2T Replaced the PAP2. Currently on the market
PAP2T-NA Replaced the PAP2. This is the open PAP2 which gives the end user access to the administrative web interface. Currently on the market
Default BCWARN PAP2 Dialplan:
(*xxS0|1xxS0|2xxS0|3xxS0|411S0|911S0|10*xxxS0|9604[2-9]xxxxxxS0|91xxx[2-9]xxxxxxS0|9011x.)